Jumper 18x pro 

$189.99

Jumper T18 Feature:

  • JP5-in-1 Multi-protocol module included R9, DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more

  • OpenTX firmware

  • Voice function

  • Zipper Case Included

  • Adjustable LED Backlights

  • Vibration reminder function

  • USB-C online firmware upgrade

  • JR/FrSKY compatible module bay on rear side.

  • JP5IN1 module - 2.4G JP4IN1 and 915mhz / 868mhz

  • 6-Flight Mode Buttons (for APM and Pixhawk flight controllers)

  • Support telemetry (depending on the receiver)

  • Up to 16 channels of output (can be extended into 32ch, depending on the receiver)

Jumper T18 Specs:

  • Size: 180*190*58

  • Faceplate: Carbon

  • Gimbal Type: Hall Sensor

  • Weight: 888g (without battery)

  • Working voltage: DC7-8.4V (NO CRSF)

  • Channels: up to 32 channels (depending on the receiver)

  • Display: IPS480*272 (800 * 480 HD IPS touch screen interface reserved - expected to be supported by openTX2.4 and above)

  • Simulator mode: 3.5mm standard ppm output or USB HID

Package Included: 1 x T18 Pro radio 1 x Zipper case 1 x USB-C cable 1 x Jumper orange neck strap

Screen Shot 2020-11-02 at 2.37.27 PM.png
Screen%20Shot%202020-11-02%20at%202.38_e
Screen%2520Shot%25202020-11-02%2520at%25
Screen Shot 2020-11-02 at 2.37.43 PM.png
Screen Shot 2020-11-02 at 2.38.37 PM.png
Screen Shot 2020-11-02 at 2.39.06 PM.png