For U.S. based customers only
Go on your next FPV adventure with our Xplorer Car Bundle! Includes the tried and true Vanquish H10 Optic in both blue (Sparco) or red (Yokohama) color schemes along with our XplorerHD RTR Kit that comes with the camera kit and the goggles! Also, all bundles will include the 3D print mount to connect directly into the chassis!
However, we do highly recommend getting an upgraded transmitter and we only trust the ELRS protocol to absolutely do the job. Select the MT12 Bundle to get an ELRS equipped radio controller so you won't lose your radio link!
Note: Assembly is required to install the camera and 3D mount to the chassis of the H10 Optic. If you choose the MT12 option, receiver installation.
How does it drive and look? Video
Why the MT12 and why your current radio sucks: Ultimate Test Video
3D mount + Camera Installation Video: Installation Video
Includes:
- H10 Optic RTR
- XplorerHD RTR Kit
- *Radiomaster MT12 ELRS* (MT12 bundle only)
Xplorer Car Bundle (H10 Optic + XplorerHD)
Will require some installation. Assembly includes the 3D mount to the XplorerHD camera kit and receiver installation if choosing the MT12 option.
Extra hardware required to finish the kit (not included)
- 5x of M3 x 20mm with M3 nuts (for the 3D mount)
- 2s to 6s battery with XT60 connector (for goggles)
Other Disclaimers
- The camera kit is NOT waterproof
- Please be aware of your surroundings as operating behind buildings, rocks, hills, or near radio towers may result in video cut out.
- XplorerHD camera kit MAX input voltage is 26v (or 6s LiPo).
- Vanquish H10 optic MAX input voltage is 12.6v (3s battery)
- Please visually check for any damages and if everything is working as intended before each use. DO NOT use if the fan is not operating as this may overheat the unit and activate shut down mode.
- Please check your local lawas for legal FPV use. HAM Amateur license is required for more than 25mW!
- Do NOT use the XplorerHD with damaged or missing antennas as this may severely damage the unit!