*Note* These harnesses will ONLY work with the V2 Sled (USB-C Attached Sled)
*Disclaimer* This is for replacement only for the XplorerHD systems. Will require the following that are not included or provided as existing hardware will be reused to replace that are included in the XplorerHD systems.
3D print files for antenna and fans
4x Sled to VTX screws
4x VTX to Fan screws
 
Please refer to the pin layout picture for your harness
8-Pin Gimbal Harness: Sled to Gimbal Assembly (Green Arrow)
6-Pin VTX Harness: Sled to VTX USB/Signal (Yellow Arrow)
4-Pin VTX Power Harness: Sled to VTX Power Plug (Red Arrow)